«

Introducing the SparkFun ProtoScrewShield

We’ve co-developed the new ProtoScrewShield with SparkFun Electronics! This big, bad daddy of a shield gives you lots of proto space, screw terminals galore, a couple of buttons, and a lovely yellow LED on pin 13. Go buy one at SparkFun, you won’t regret it!

Also, check out the build photos here on the product page.

This entry was posted on Wednesday, April 13th, 2011 at 6:00 am and is filed under ScrewShield. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

4 Responses to “Introducing the SparkFun ProtoScrewShield”

  1. Rich says:
    May 15, 2011 at 11:30 pm

    I got a board, which is cool, but I’m having a hard time deciphering what is connected to what in the proto area. The silk screen makes some hints but my eyes just aren’t up to the job. Don’t make me probe every connection… please :-)

  2. admin says:
    May 16, 2011 at 12:33 am

    Hi Rich,

    Please check with SparkFun about that; they designed this variant of the board. You can find a place to comment (and you can also find SparkFun’s design files) at http://www.sparkfun.com/products/9729

    Thanks,

    Brian

  3. Rich says:
    May 16, 2011 at 7:10 pm

    Ah, sorry, bought it the uk, looked at the sparkfun site to no help and assumed you guys must be the protagonist in this board as it had your web address on it!

    I’ll go prod sparkfun :-)
    Thanks.

  4. fribbe says:
    March 17, 2012 at 10:48 am

    Hi Rich,

    have a look at:

    http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/Visio-Screwshield.pdf

    fribbe

Leave a Reply